R023 Resource Adapter


The Resource adapter reads the content of a workspace resource. The received data is forwarded to a configurable reader. The adapter can be combined with other adapters using a multi-adapter port.

32/64bit 32/64bit 32/64bit
  • None
Known limitations
  • Resource adapters can only be used within multi adapter/resource ports.
  • Stable
  • Read
  • Sync
  • Enable: Enables/disables the port adapter.
  • Resource: Select the eclipse resource as the input.
  • Reader: Select the reader to parse the raw data stream. If not selected, the system selects the most appropriate one.
  • Configuration: Optionally, a serialization configuration can be selected (depending on the reader).
  • Insert as root: If the adapter is included in a multi adapter port, the flag will force the adapter to add its signal hierarchy into the root of the combined record.
  • Synchronisation: Allows to define a script to do adapter synchronisation.


Screen Cast: Using the Resource Adapter

Source Configuration

  • Resource: Use the combo box to select the input resource.


Configure the serializer by selecting a reader and optionally a reader configuration (some reader require a configuration, e.g. the CSV reader).
You may use the buttons '+' and '...' to add and manage existing reader configurations (Preferences).
You may use the "Test Line Reader" (extracts lines from the raw input) and "Test Block Reader" (extract fixed size byte blocks) for debugging purpose.


Using a multi adapter port, you can combine an unlimited number of different input adapters. The synchronization section of the adapters allows you to synchronize inputs with different domain bases (e.g. each input has its own time base).

11 Synchronisation

r />

technical software and tooling


Contact Us

This email address is being protected from spambots. You need JavaScript enabled to view it.